How to Assemble the SuckR PRO

Proper assembly of your Bigboi SuckR PRO ensures optimal performance and ease of use. Follow these step-by-step instructions to assemble your vacuum cleaner correctly.

Step-by-Step Instructions

1. Release and Remove Cover

   • Release the lock (1) of the SuckR PRO to remove the cover (2). Pull out the transport wheels and accessories.

1. Install Transport Wheels

   • Install the four transport wheels onto the unit.

1. Connect Extension Tube

   • Connect the extension tube (1) into one rod.
   • Install the hose (3) into the connector of the SuckR PRO (4).
   • Connect the hose connector (2) to the rod.
   • Install the sofa brush or narrow nozzle to your cleaning tool, depending on your cleaning needs.

1. Installing the Filter

   • Pull out the eccentric latches (2) from the SuckR PRO cover body.
   • Install the cassette filter (1) and fix it with eccentric clamps.
   • Depending on the operating conditions, install a paper filter bag in the SuckR PRO if necessary.

1. Installation of a Replaceable Filter Dust Bag

   • Install the replaceable filter bag (1) on the seat (3). The rubber seal (2) must fully enter the corresponding groove.
   • Pull the filter bag in the opposite direction to the installation to check the fit.

By following these assembly steps, you ensure your SuckR PRO is set up correctly for efficient operation. If you encounter any issues, refer to our troubleshooting guide or contact our support team for assistance.