How to Use the Extraction Function (Kit Sold Separately)

The extraction function of your Bigboi SuckR PRO is perfect for deep cleaning tasks. Follow these steps to use the extraction function with the separately sold kit:

Step-by-Step Instructions

1. Fit the Water Pipe

   • First, fit the water pipe as shown in Pic.12.

1. Connect the Extractor Hose

   • Remove the current vacuum hose.
   • Connect the extractor hose and install the spray brush or spray crevice tool.

2. Install the Water Tank

   • Install the water tank as shown in Pic.13.

1. Power On the Unit

   • Insert the plug into the outlet.
   • Press the on/off switch (Pic.1) on the unit.

2. Code Matching for First Use

   • When using the XTRACTR KIT for the first time, code matching is required:
     1. Turn the switch to position 'I' (Pic.9), the SuckR PRO starts working.
     2. Press the setting button (S) twice (Pic.11), then press V or S on the remote (Pic.14).
     3. The SuckR PRO will stop when matching.
     4. After 10 seconds, the remote will work. Note: The remote cannot work during matching.
     5. Restart the SuckR PRO (press the button 'O', then 'I' again) (Pic.9), and it will work automatically.

1. Control Vacuum Functions

   • Press the “V” button on the remote to control the wet or dry vacuum cleaner function.

2. Control Water Spray Function

   • Press the “S” button to start the water spray function. Pressing it a second time will stop the spray pump motor (Pic.14).

3. Turn Off the Unit

   • To turn off the unit, select “O” on the main power switch located on the unit (Pic.9).

By following these steps, you can effectively use the extraction function of your SuckR PRO for deep cleaning tasks. If you encounter any issues, refer to our troubleshooting guide or contact our support team for assistance.