Welcome to the bigboi Knowledge Base
Your Source for Expert Advice, Troubleshooting, and Product Information
-
WashR PRO
- The WashR PRO has a oil leak
- The WashR PRO motor does not start when switched on
- The WashR PRO When I switch on the unit, the motor hums but does not run
- Wash PRO TSS Version only. The motor starts even with gun trigger is released
- WashR PRO TSS Version only. No water delivery when gun trigger is depressed
- How to Adjust your Spray Pressure on the WashR PRO
- How to maintain your WashR PRO
- How to store your WashR PRO
- The WashR PRO is experiencing a water leak
- The WashR PRO pressure drops during use
- The WashR PRO Pressure fluctuates
- The WashR PRO pump is noisy
- The WashR PRO pump is running but does not reach the working pressure
- There is the presence of water in oil on the WashR PRO
- How to check your oil level before use?
- How to Setup the WashR PRO
- How to Start your WashR PRO
- How to Stop Your WashR PRO
- How to use your Nozzles with WashR PRO
- WashR PRO Manual
- The WashR FLO Motor refuses to start
- WashR FLO Does not reach high enough pressure
- WashR FLO Motor starts up but there is no working pressure
- WashR FLO motor stops
- WashR FLO No detergent present
- WashR FLO Output pressure varies high and low
- WashR FLO Spray wand is leaking
- How to Set Up the WashR FLO
- How to Turn On and Off Your WashR FLO
- WashR FLO Maintenance Guide
- WashR FLO Manual
-
SuckR PRO
- WashR FLO pump is very noisy
- WashR FLO Water is leaking from the pump
- Storage and Transportation of the SuckR PRO
- Why Is My Engine Housing Overheating?
- Why Is the Suction Weakening?
- How to Assemble the SuckR PRO
- How to Service the SuckR PRO
- How to Use the Extraction Function (Kit Sold Separately)
- How to Use the SuckR PRO Vacuum Function (Wet & Dry)
- SuckR PRO Manual
Table of Contents
How to Use the SuckR PRO Vacuum Function (Wet & Dry)
Table of Contents
Using your Bigboi SuckR PRO for both wet and dry vacuuming is simple and efficient. Follow these steps to operate the vacuum function correctly:
Step-by-Step Instructions
-
Turn On the SuckR PRO
- Insert the plug into the outlet.
- Turn the switch to position "I" to turn on the SuckR PRO automatically. The remote can also control the SuckR PRO on/off (Pic.9).
-
Using the Remote Control
- Press the on/off button (A) on the remote.
- Choose between three speed settings: low, medium, and high (Pic.10).
-
Stop the Machine
- To stop the machine, press the on/off switch to the 'O' position.
-
Remote Control - Code Matching
- If the remote does not work or if you are using a new remote, code matching is required:
- Turn the switch to position 'I' (Pic.9).
- Press the setting button (S) twice (Pic.11), then press on/off (A) on the remote (Pic.10).
- The SuckR PRO will stop working when matching. After 10 seconds, the remote will work. Note: The SuckR PRO is already matched with its own remote and can work directly when received.
- If the remote does not work or if you are using a new remote, code matching is required:
By following these steps, you can effectively use your SuckR PRO for wet and dry vacuuming tasks. If you encounter any issues, refer to our troubleshooting guide or contact our support team for assistance.
Note: The dust bag is suitable only for dry vacuum-cleaning ONLY!
Updated on 24 Jun 2024
What are your Feelings?
Thanks for your feedback
- Choosing a selection results in a full page refresh.