How to Set Up the WashR FLO

Setting up your Bigboi WashR FLO is simple and straightforward. Follow these step-by-step instructions to ensure your pressure washer is ready for use.

Step-by-Step Instructions

1. Insert Hose into Power Gun

   • Insert the end of the hose firmly into the power gun.
   • Confirm the hose is locked into the power gun by pulling slightly on the hose. The hose is now securely attached to the power gun.

1. Connect High Pressure Hose

   • Screw the quick release hose connector onto the water outlet connector.
   • Insert the other end of the pressure hose into the hose connector. Ensure the high-pressure hose is properly tightened to prevent it from slipping or popping off when the unit is turned on.

1. Attach Garden Hose Adaptor (Optional Accessory)

   • Attach the quick hose adaptor to the end of the garden hose.
   • Snap the quick hose adaptor onto the quick connect filter.

1. Connect Power Lance to Power Gun

   • Insert the power lance into the power gun, push together, and twist clockwise to lock in place.
   • Change the nozzle as needed for different cleaning tasks.

1. Power On the Unit

   • Rotate the power switch to the ON (I) position.
   • The motor starts only if the trigger of the gun is pulled and shuts off when the trigger is released.

1. Adjusting the Spray

   • The nozzle is adjustable to allow you to change the pressure and spray pattern.

By following these steps, you ensure your WashR FLO is set up correctly for optimal performance. If you encounter any issues, refer to our troubleshooting guide or contact our support team for assistance.